Why add an amplifier to your car stereo. More power and better sound

Gain controls on an amplifier are basically just small potentiometers variable resistors or volume controls if you will, that allow you to adjust the incoming signal to the amplifier so the amplifier works well with your headunit of choice or to match the level of other amplifiers in your system. Its not rocket science to set the gains. With one amplifier its desirable to have a nice swing on your headunits volume control. Let me try to clarify this a little. If we hook up a head unit with a 8volt or more output to an amplifier, then the volume will get loud very fast when we start to turn it up In other words if our digital volume control goes from , then a HIGH VOLT output to an amplifier might make the amplifier reach full power at 5 on the volume scale

Wiring your LED Strip to car audio amp

The products might look familiar, the result of evolution rather than revolution, but they work, they go on working and if they do stop working, the company is there and ready to fix them. Buyers all too often do just that, seduced by the new — and all too often they live to regret it. Another name that belongs close to the top of that list is Gryphon Audio, doyen of the Danish high end. Gryphon is a company whose products, developed under the balefully benevolent glower and in the substantial shadow of Gryphon-in-chief Flemming Rasmussen, seem to have simply gotten bigger — and blacker — over the years.

Its gold-plated front panel and tongue-in-cheek rack-mount handles presented their own humorous take on the form factor of those American muscle amps from the likes of Krell and Threshold, which were just reaching European shores at that time. Pretty soon, the exquisite fit and finish that characterized that first head amp had been incorporated into products like the Antileon power amp, whose size, sophistication and astonishing density made those early Krells seem like positive lightweights.

When you are choosing an amplifier to provide your car stereo system with more power, the first consideration is how it will interface with the system’s head unit.

I was pestering the guy at Pacific Stereo in the mall, begging to audition the Sansui AU amplifier and a pair of JBL L speakers that I was lusting after—and yes, the speakers had the orange grilles. Time to put up or shut up. Visitors to the TONE studio always take note of them off in the corner, and they always bring back fond memories. When a cursory 4: In , a pound amplifier felt like a monster, but next to my reference Pass Xs monoblocks with a combined weight of almost a ton, literally , the AU is comparatively gentle on my back.

Crazy as this seems, the purity of the dCS as a source truly reveals just how good the Sansui really is. Extended listening to this combo proves musically involving, and revisiting the music I was listening to in is particularly fun. The combination just works, and while the vintage combo is a bit grungier and foggier than my reference system, the whole experience is welcome and highly palatable. Seriously, if I quit my job as a hi-fi reviewer tomorrow, I could easily live with this system.

Of course, the AU has a pair of tone controls for bass and treble that can be switched out of the signal path for purists. The watt-per-channel Sansui amplifier is rated conservatively, and reviews from Stereo Review and Audio from when the AU was new indicate that it produced around watts into an 8-ohm load; more than enough to drive all but Magnepans to a major level.

Connected to a more modern speaker, like the Dali Rubicon 2s featured on page xx of this issue , the AU turns in a superb performance.

10 Best Car Radio Head Units For Your Stereo System – 2017

Wiring connectors assorted connectors and a 3 way connector Wiring schematic specific to your vehicle Wrenches assorted sizes Step 1: Park your vehicle and apply the parking brake. Your parking brake should be a pedal or a hand brake.

4) Connect a minimum 10AWG wire from the “BAT” position of the ignition switch to terminal “S” on the back of the amp gauge. 5) Connect a minimum 10AWG wire from the Alternator “OUTPUT” to terminal “ S ” of the amp gauge.

To really highlight the bass of your car stereo, you need a setup capable of properly reproducing low frequency notes. Adding a subwoofer and amplifier to your existing stereo is a great way to improve the bottom-end output of your system and is one of the most common upgrades performed on a car’s audio gear. You have two basic options: You can purchase a separate amplifier and speaker or you can purchase a powered subwoofer with a built-in amplifier.

When purchasing either form of amplification, look for an amp that accepts high-level signals. This allows you to run a high level speaker signal from your stock stereo’s powered head unit without any additional wiring.

Video: Wiring Speakers To Your Marine Amplifier

If you have a car audio subwoofer that is not used in your car, you may want to install it in your home to enhance your home stereo or theatre system. This is a relatively easy task and does not require any special skills. Before attempting this install, be sure that you have some RCA wires, speaker wire, and the correct voltage power supply that the subwoofer needs.

Don’t bridge your amplifier if your speakers cannot handle the increased power. Always check the user guide and diagrams before you bridge your amplifier. Using your amplifier’s manual is the easiest way to figure out how to bridge it.

First, you must find a functioning car to use for the jump-start. Make sure that both car owners are comfortable opening the hood and identifying the battery and battery terminals. Jumper cables are the most popular tool used to jump start cars because they are inexpensive and easy to store. Jumper cables usually come in a variety of lengths, ranging from feet. Some people think longer cables are better so that you do not have to move a car with a dead battery.

But, while longer cables provide convenience, they may lose power as the longer the cable, the farther the energy has to travel. The gauge of the cable denotes the strength of the cables. The lower the gauge, the thicker the cables and the stronger they are. Gauge six is a standard size for jumper cables.

how can I hook up 10 speakers to my 4 channel car amplifier

Author Naxos 10 Comments I spend most days at the office trying to come up with ways to get music onto your computer. Inexpensive for a few CDs. Your house or car quickly fills up with CDs. Buy a cable The easiest way to connect your computer to your stereo is to use a cable. I use nylon cable ties to keep the audio cables away from the tangle of mains leads and power supplies that seem to be breeding in the space behind my computer.

If, like me, you find yourself fumbling in the gloom behind your computer in search of the correct plughole, it may help to know that the one you want the Line Out socket is almost always green.

Hooking up loudspeakers to a stereo amplifier isn’t difficult. But it’s extremely important that you use the appropriate gauge wire for the power output of the speakers and stereo amplifier, or you risk.

How to Install a Car Audio Amplifier and Subwoofer by braniac This article will provide a better working knowledge of car audio components and outline how to successfully install them. First, under the hood of your vehicle, disconnect the cable from the Negative – terminal of the battery. This will prevent any accidental short circuits from happening while installing your amplifier.

Locate an area under the hood where you can mount your fuse holder. Be sure to find an area that is as close to the battery as possible since the fuse can only protect against a short circuit if the fuse is within the short circuit. Once you have located an area, drill and screw your fuse holder in place. From inside the car, locate an area, preferably an existing protective rubber grommet, that will provide an easy pass through the firewall and under the hood.

The image to the left shows an example of an existing rubber grommet that provided access from inside the car to the area under the hood. Once you have located this grommet, try pushing the power wire through it from inside the car. If you are unable to do so, puncture the grommet a couple of times with a screwdriver and try pushing the power wire through again.

Pc power supply powering car amplifier in home

Support 4 x W of on-road power With enough body-shaking power to rival that of an external amp, the MEX-XB BT in-car receiver ensures you feel every beat and bass line as you cruise along. Vibrant beat-synchronized LEDs add a splash of color to every track, while new voice control functions help you stay safe and focused behind the wheel. SongPal Take control of your entire music library. With SongPal, you can find the right track, explore apps, and set the volume, all using your voice.

May 17,  · You could also hook up a car radio to your PC if you’d like, but I haven’t done it yet so I don’t have a guide. If your case is a tank (really heavy-like) you could rig up The Amp to your right-side panel, but mine’s a lightweight, so again, no guide.

And a big part of that information is our music collection. It most probably occupies the biggest part of the SD card on our smartphone, and we would like to listen to it anywhere and anytime. And a part of our day where we would want to listen to our music is when we drive in our cars, going from place to place, but also in our home, when we like to plug in our smartphones to the audio system and start relaxing. There are a few options that work with your existing audio system, the old fashioned one, with just a few modifications.

Of course, newer models of car stereos or home audio systems already have Wi-Fi or Bluetooth connectivity and can be connected to many devices such as smartphones and tablets. Depending on which device you want to connect your smartphone, there are a few options available. Newer models, sometimes called smart radios now have this feature integrated. From here, the process is very simple. Just turn on the Bluetooth in the car radio and search for it from your device.

You will have to pair the devices, and in the majority of stereos, the pairing PIN code is written in the manual. They connect via audio cable to the stereo and via Bluetooth to the smartphone. Plug in one end to your smartphone and the other to the AUX port on your stereo. The process is the same as with the AUX cable.

How to install an amp and sub in your car